The frame is able to access the network but is unable to access the DNS server. In most cases, these settings should be left blank so that the frame can retrieve the proper information on each connection attempt from your access point/router using DHCP. Go to the wireless settings screen and verify that the IP Address, Subnet Mask, and Default Gateway are set properly. The frame is unable to access the default gateway on your network.
To view the Error screen, scroll through your slideshow by pressing the "Next" button on the button tray until you reach that slide. If you experience one of the following errors with your wireless connection, check Line 16 of your CEIVA frameâs Error screen for a message. Press the Select button again when Save is highlighted to confirm all of your changes.Press the Select button when Save is highlighted to confirm your changes. Enter IP address of the DNS Server, pressing the Select button after each.
Enter the IP address of the DNS Server, pressing the Select button after each character. If not using DHCP, choose Static DNS to specify the DNS servers that will be used by the wireless adapter, and press the Select button.Choose Auto DNS if you are using DHCP (leave this selected if you are not sure) and skip to step number 5.From the Wireless Settings screen choose Edit Wireless DNS.Choose Wireless Settings from the Connection Settings screen.If you have a static DNS, please use the directions below to connect. Once completed, your CEIVA is ready to receive and display photosâautomatically! A status screen will indicate the connection progress. Push and hold the white Picture button located on the back of your CEIVA until you see the message, âYou can let go now, Iâm dialing in.â Then, relax while your CEIVA connects to the CEIVA Network.Press the Select button twice to save your selection. Selecting each letter is the same process as texting on a mobile phone keypad. If your network requires a key, please enter it at this time via the on-screen keyboard. If your network does not require a key (password), you are finished.Press the Select button again to save your selection. Press the Select button to choose a network. If you do not see your network in the list hit Refresh to scan again. On the Select Wireless Network screen, use the Left and Right Arrow buttons to scroll through available networks.The frame will automatically scan for available networks and display them on the following screen. From the Setup Wireless screen, choose Select Wireless Network.
CEIVA SNAP INSTRUCTIONS HOW TO
From the Connection Settings screen, choose How To Connect.From the Settings screen, choose Connection Settings.From the main menu screen, choose Settings.The Left and Right and Up and Down buttons allow you to make selections and move between different fields. Press the Menu button to activate Menu Mode.Plug the power into your CEIVA frame and wait a few moments until the unit powers up.Please Note: The CEIVA adapter cable is not required for use with the CEIVA LF4007 and LF4008. Plug the CEIVA Wireless adapter directly into your CEIVA frameâs C-Port 1.The network settings must be entered into your CEIVA frame exactly how they appear in your wireless network or your frame will not connect. If you are unsure how to access your network settings, please contact your wireless router company and they will be able to show you how to access your wireless network. In order to connect your CEIVA frame and CEIVA wireless adapter to your wireless internet connection, please make sure you have all of the wireless network settings listed below. CEIVA for Whirlpool Refrigerators with centralpark™ connection (LF-4008CP).CEIVA 8-Inch Digital Photo Frame™ (LF4008).CEIVA 7-Inch Digital Photo Frame™ (LF4007).
0 kommentar(er)
